- Top >
- Products >
- HEISHIN ROBO DISPENSER >
- Case study:Electrical and housing material
For reliable applying / filling operation without any loss, the fluid needs to be discharged at constant rate consistently. HEISHIN ROBO DISPENSER, with its unique single eccentric screw design, delivers non-pulsating continuous discharge. Its superb flow control contributes to improved quality and reduced losses.
For reliable sealing / water-proofing / insulation, the material needs to be dispensed uninterrupted and at constant rate. HEISHIN ROBO DISPENSER capable of non-pulsating discharge at constant rate delivers consistent high precision dispensing. What's more, discharging no more amounts than is necessary prevents the material from being wasted.
Two HEISHIN ROBO DISPENSERs in combination with a static mixer, allow applying and filling operation to be performed while mixing. Separately controllable discharging rates for base compound and hardener enables accurate mixing and makes it easy to set or change the mixing ratio.
Continuous discharge at constant rate provides consistent dispensing on large works. Operation in conjunction with a conveyer, etc. provides high-speed dispensing according to its line speed. No dripping and residual fluids can keep the work and working place clean and eliminate unnecessary chores such as cleaning up.
To increase operating efficiency, we recommend various types of nozzles such as a flat nozzle for band applying, branched nozzle for multiple discharges, and bent needle for lateral dispensing. The special nozzles enable automatic dispensing where it would have been unavailable.
Silicone resin on the fluorescent lamp.
Cover circuit board with UV resin.
Sealing electronic component with epoxy resin.
Silicone grease on IC radiator board.
Water-based paint in the groove on board of housing.
Dispensing sealer on aluminum sash.
